a pc can be connected to the switch via a two-pair category 3,4,5 utp/stp straight cable. the pc (equipped with a rj-45 10/100mbps jack) should be connected to any of ports for the s 108m/s 116m/s 116/s 124.

   

    the led indicators for pc connection are dependent on the lan card capabilities. if led indicators are not illuminated after making a proper connection, check the pc's lan card, the cable, switch conditions and connections.

    ·the following are led indicator possibilities fora pc to switch connection:

    ·the 100m led indicators come on for a 1 oombps and stays off for 10mbps.

    ·the link/act led indicator illuminates upon hookup.