when using crossover cable, this is done from the any (mdi-x) port of the switch to any of the 1 ombps or 1 oombps (mdi-x) port of the other switch or other devices.

    the switch's led indicators for the respective connected ports are as follows:

    ·100m led speed indicators are on for 1 oobase-tx, otherwise off.

    ·link/act indicators are on.

    the first twisted-pair port (port 1) is shared with the uplink port. if you connect a hub to the uplink port, then do not use port l(for si16: its uplink port is shared with port 16).