2 press power on-off button again to turn off the projector.
lamp indicator lights bright and ready indicator turns off.
after the projector is turned off, cooling fans operate (for 90 seconds).
3 when the projector has cooled down, ready indicator lights green again.
to maintain the life of lamp, once you turn projector on, wait at least 5 minutes before turning it off.
do not disconnect ac power cord before ready indicator lights green.
projector cannot be turned on during cooling period with ready indicator off. you can turn it on again after ready indicator lights green.
note on operation
when warning temp. indicator flashes red, the projector is automatically turned off. wait at least 5 minutes before turning on the projector again.
when warning temp. indicator continues to flash, follow the procedures below:
1. press power on-off button to turn the projector off and disconnect ac power cord from an ac outlet.
2. check air filters for dust accumulation.
3. clean air filters. (see "air filter care and cleaning" section on page 40.)
4. turn the projector on again.
if warning temp. indicator should still continue to flash, contact the sales dealer where you purchased this projector or service center.
when “power management” function is on, the projector detects signal interruption and turns off projection lamp automatically. refer to “power management” on page 36.