this projector automatically tunes to most different types of computers based on vga, svga, xga, or sxga (refer to “compatible computer specifications” on page 23). when selecting computer, this projector automatically tunes to incoming signal and projects proper image without any special setting. (some computers need setting manually.)

    projector may display one of the following messages.

    auto

    when the projector cannot recognize the connected signal as pc system provided in this projector, auto pc adjustment function operates to adjust the projector and the message “auto” is displayed on system menu icon.

    (refer to p24.) when image is not provided properly, manual adjustment is required. (refer to p25 and 26.)

    there is no signal input from computer. make sure the connection of your computer and projector is set correctly.

    (refer to troubleshooting on page 41.)

   

    select computer system manually

    this projector automatically selects pc system among those provided in this projector and pc system can be also selected manually.

    1 press menu button and on-screen menu will appear. press point left/right buttons to move a red frame pointer to pc system menu icon.

    2 press point down button to move a red arrow pointer to the system that you want to set, and then press set button.