this projector can automatically tune to the display signals from most personal computers currently distributed. however, some computers employ special signal formats which are different from the standard ones and may not be tuned by multi- scan system of this projector. if this happens, the projector cannot reproduce a proper image and the image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture, or a skewed picture.

    this projector has a manual pc adjustment to enable you to precisely adjust several parameters to match with those special signal formats. this projector has 5 independent memory areas to memorize those parameters manually adjusted. this enables you to recall the setting for a specific computer whenever you use it.

    this pc adjust menu cannot be operated when the input signal is digital or “rgb” is selected on pc system menu (p22).

    1 press menu button and on-screen menu will appear. press point left/right button to move a red frame pointer to pc adjust menu icon.

    2 press point down button to move a red frame pointer to the item that you want to adjust and then press set button. adjustment dialog box will appear. press point left/right button to adjust value.

   

   

   

    fine sync, total dots, display area (h/v) and full screen cannot be adjusted when “1035i (hdtv)” or “1080i (hdtv)” is selected on pc system menu (p22).