choose video by pressing input button on top control or on remote control unit.
if projector cannot reproduce proper video source, select correct input source through menu operation (see below).
menu operation
1 press menu button and on-screen menu will appear. press point left/right button to move a red frame pointer to input menu icon.
2 press point down button to move a red arrow pointer to video and then press set button. source select menu will appear.
3 move a pointer to the source that you want to select and then press set button.
auto
projector automatically detects incoming video signal, and adjusts itself to optimize its performance.
1?when both y jack and s-video jack are connected, svideo jack has priority over y jack.
2?when both y-pb/cb-pr/cr jacks and s-video jack are connected, y-pb/cb-pr/cr jacks have priority over svideo jack.
video
when video input signal is connected to y jack, select video.
s-video
when video input signal is connected to s-video jack, select s-video.
y,pb/cb,pr/cr
when video input signal is connected to y-pb/cb- pr/cr jacks, select y, pb/cb, pr/cr.