to use remote control unit as wireless mouse for a personal computer, installation of the mouse driver (not supplied) is required. make sure that the mouse driver is properly installed in your computer and that the mouse port (or usb port) of your computer is activated.

    1 connect the mouse port (or usb port) of your computer to control port (or usb connector) of this projector with control cable (or usb cable). (refer to page 11, 12 for connection.)

    2 turn the projector on first, and then turn on your computer.

    when the computer is switched on first, wireless mouse may not work properly.

    when your computer has no mouse port, connect serial port of your computer to control port of the projector with control cable for serial port (not supplied).