to install a module:

    1. wear an anti-static wrist strap

    2. remove the blank filler panel from the chassis slot and save it for future use

    3. hold the ejector levers of the module with both hands and push them outward

    4. align the module with the guides in the chassis and slide it gently into the slot

    5. push the module until the positioning pin on its handle bar touches the hole in the chassis

    6. push the ejector levers inward and push the handle bar pin into the positioning hole in the chassis

    7. fasten the module’s captive mounting screws into the holes in the chassis with a screwdriver