(for united states only)
this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. these limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. this equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
fcc warning: to assure continued fcc compliance, the user must use only shielded interface cable and the provided power supply cord. also, any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.
english
to prevent fire or shock hazard, do not expose this product to rain or any type of moisture.
the socket-outlet must be near this equipment and must be easily accessible.
(for united kingdom only)
for your safety please read the following text carefully.
this appliance is supplied with a moulded three pin mains plug for your safety and convenience.
a 5 amp. fuse is fitted in this plug. should the fuse need to be replaced please ensure that the replacement fuse has
fuse is replaced. if you lose the fuse cover the plug must not be used until a replacement cover is obtained. a replacement fuse cover can be purchased from your local panasonic dealer.
if the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the plug cut off and disposed of safely.
there is danger of severe electrical shock if the cut off plug is inserted into any 13 amp. socket.
if a new plug is to be fitted please observe the wiring code as shown below. if in any doubt please consult a qualified electrician.
this appliance must be earthed.
the wires in this mains lead are coloured in accordance with the following code.
green-and-yellow : earth
blue : neutral
brown : live
as the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.
the wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked with the letter e or by the earth symbol or coloured green-and-yellow.
the wire which is coloured blue must be connected to the terminal in the plug which is marked with the letter n or coloured black.
the wire which is coloured brown must be connected to the terminal in the plug which is marked with the letter l or coloured red.
how to replace the fuse :
open the fuse compartment with a screwdriver and replace the fuse.
the product should be used only with a power cord that is supplied by the manufacturer.
roller cleaning paper precautions
before using the roller cleaning paper, please read these instructions completely. keep these instructions for future reference.
1 do not drink or inhale the roller cleaning paper fluid including isopropyl alcohol.
2 the roller cleaning paper may be harmful to your skin, so please use protective gloves.
3 do not use the roller cleaning paper near a heater or open flame.
4 do not store the roller cleaning paper in direct sunlight or in a place over 40 oc (104 of).
5 only use the roller cleaning paper to clean the rollers and scanning area.
6 if you need more information about the roller cleaning paper, please refer to the material safety data sheet (msds).
7 please ask your panasonic sales company about obtaining the material safety data sheet.
keep away from fire.