open the bag on the dotted line and take out the roller cleaning paper.
· if the roller cleaning paper bag is left opened for a long period of time before using it, the alcohol will evaporate. please use the roller cleaning paper immediately after opening the bag.
the roller cleaning paper (model no. kv-ss03) is available from the dealer where you purchased your scanner.
for supplies and accessories: call 1-800-346-4768 (u.s.a. only) or your dealer.
1 turn the power off.
2 push the adf door release to open the adf door.
3 use the roller cleaning paper (kv-ss03) to remove the dirt from the surfaces of the retard roller, paper feed roller, separation roller, 6 drive rollers, 6 free rollers. also, remove dust on the paper sensors and reflector sheets with a cotton swab.
·when wiping off the dirt on the roller surfaces, hold the rollers to prevent them from rotating, and wipe the rollers all the way around them proceeding from one end to the other in the directions of the arrows shown in the figure on the right.
4 clean the reflector sheet for the ending sensor.
(1) remove dust on the reflector sheet of the ending sensor with a cotton swab.
(2) the reflector sheet is behind the shaft.
5 make sure that the sensor rollers are installed properly, before closing the adf door.
6 close the adf door.
7 clear the roller cleaning counter with user utility.
·after cleaning the above rollers, click [clear counter] button for [after clean roller] with user utility.