without connecting to a pc, the scanner's whole mechanism’s operation can be checked.
only one sheet is fed with this test.
scan parameters can be changed for scanning test.
imprinter test print can be performed at the same time.
1) place the documents to scan on the hopper.
if fi-486prfr and/or fi-486prreis installed, [screen50-3] is displayed for you to setup imprinter test conditions.
if an imprinter(s) is not installed, the scanner starts scanning operations.
then select the imprinter to use.
if the printer to use is fi-486prfr, select [pre].
if fi-486prre, select [post].
if imprinter test is not required, select [off].
2. multi feed
without connecting to a pc, the scanner's whole mechanism’s operation can be checked.
in this test documents are scanned continuously.
scan parameters can be changed for scanning test.
imprinter test print can be performed at the same time.
[on] to do imprinter test while scanning.
then, select the imprinter to use.
if the printer to use is fi-486prfr, select [pre].
if fi-486prre, select [post].
if imprinter test is not required, select [off].
3. display the cumulative lamp-on time
you can check the cumulative number of lamp-on time.
4. option installation status display
you can check the options installation status.
