1 set the switch on its four rubber feet
2 mount the switch in a standard rack (1u high)
3 hang the switch on a wall using its wall-mount slots.
to rack mount the switch, follow these instructions:
1. the switch has four mounting holes on each side. screw an included mounting bracket into each side.
2. lift the switch into the rack, and secure the brackets with additional screws (not included).
to hang the switch on a wall, follow these instructions:
1. the wall-mount slots are two crisscross slots on the switch’s bottom panel (see figure 3-3).
the distance between the two slots is 95 mm. attach two screws to the wall, so that the switch’s wall-mount slots line up with the two screws.
2. maneuver the switch so the screws are inserted into the two slots.
congratulations!
the installation of the 10/100 switch is complete.