this chapter provides detailed instructions for the management of fcd-2 by means of an ascii connected to the fcd-2 supervisory port. the information presented in this chapter includes:

    1 description of supervision terminal hardware requirements, communication and handshaking - section 4.2

    2 starting a management session by means of the supervision terminal - section 4.3

    3 description of supervision terminal set of commands and command syntax - section 4.4

    4 general operating instructions, including start-up, routine operations, and stopping of remote control - section 4.5.

    the instructions appearing in this chapter assume that the supervision terminal operator is familiar with the fcd-2 system and with its configuration parameters.