define the supervisory port parameters. see table 3-5 for parameter description, allowable ranges and practical selection recommendations.
syntax
def sp
use
1. to define the supervisory port parameters, type:
def bp[enter]
the supervisory port parameters data form is displayed. a typical form is shown below. the form presents the current parameter values as defaults.
2. change the parameter values as follows:
(1) use the spacebar to bring the cursor to the beginning of the first field.
(2) to change the selected field, press [f] or [b] to scroll among the available selections.
(3) when the desired selection is displayed, press the spacebar to move to the next field.
in addition to the parameters listed in chapter 3, table 4-4 lists the parameters, which can be programmed only from the terminal.
3. when done, press [enter].
fcd-2 will display current time and date, followed by the fcd-2 prompt.