the router has two differnet ways to set up time base: one is using computer time base via http protocol, another is using ntp ( network time protocol) client to get time base from the time server. if you want to use any time-based function (ex. call schedule),the system time function should be worked properly in advance.

    configuration

    一、set time base using web browser

    1. before setting time base using web browser, you have to make sure if the computer time is exact or not. login web configurator -] click time setup.

   

    2. select use browser time and click ok button. click time setup again and push inquire time to set time base to the router.

   

    3. the current system time block will display exact time inforamtion as your computer.

    二、set time base using time client

    1. before setting up the time base using time client, you have to make sure if the time server is working properly. if the time server is located at the internet, you should also make sure the router has internet access capability. login web configurator -] click time setup.

    2. click use internet time client, choose time protocol as ntp, give an ip address of time server in the server ip address, and then choose an exact time zone in the time zone and select an updated time interval in automatically update interval. the following is an given example.

   

    3. click ok button, wait for few seconds, and the time client will get time base from the specified time server. click time setup again to check current system time information as below.