scan menu
counter menu
imprinter menu
depending on the setting of the “counter setting menu”, the page number of the scanned document will be printed. the imprinter option (kv-ss010) is required. if a host computer is connected, there may be settings required on the host computer as well.
others menu
一 operation
1 press one of the menu key until the desired menu is displayed.
(1)the scan, counter, imprint and others keys are used as a menu key.
(2)when pressing the scan key, the display will appear as shown at the right.
(1)in steps 2 or 3, you can change to the desired menu by pressing the desired menu key.
(2)see pages 20 to 28 for details.
(3)for changing the display language, see page 14.
二actual settings
scan setting menu (by pressing the scan key)
for changing the display language, see page 14.
1?when scanning a document which is shorter than 210 mm / 8.3" (a5 size) in length, double feed detection will not work well.
2?thick, creased, or edited documents with correction fluid as well as documents with holes near the center may give you false double feed warning.
scanning settings 01-17 must be saved using setting ?8 save scanning settings (execution) even if they are not saved, they will be applied. if the power is turned off, the next time the unit is used they will not be applied.
counter setting menu (by pressing the counter key)
imprinter setting menu (by pressing the imprint key)
both a pre-imprinter and post-imprinter can be installed at the same time. however, the operator may only use one imprinter at a time. if both of the imprinters are installed, you can set the following conditions.
others setting menu (by pressing the others key)
三 other display explanations
