1 set up your video presenter properly.
(see page 8 and 9.)
2 connect the input device from which you want to receive the image and the output device on which you want to see the image.
(see pages 10 through 13.)
3 turn the power of the input and output device, and the video presenter on.
when the video presenter is powered on, the head lamps turn on. to turn it off, press lamp button of the presenter.
effective range of the remote control
when using the remote control, always aim it directly at the remote control receive window of your video presenter. refer to the figure at the right side for acceptable range.
4 choose the video source with the int/ext button of the presenter.
if no ext sync is displayed, check if the external input device is connected properly.
5 open the image on the av device or computer.
now you see the image through the tv or monitor.
6 if necessary, you can adjust the audio volume using the volume buttons on the remote control.
