(see page 8 and 9.)
2 connect to a tv or monitor to display the image.
(see page 10.)
3 turn the power of the output device and the video presenter on.
4 place the object on the lightbox, and adjust the head to face the object.
if there is no image on the tv or monitor, check if the cable is properly connected, and press the int/ext button of the presenter to select the input mode to int out.
5 select a proper lighting source with the lamp button of the presenter. each time you press the button, head lamps on, lightbox on, then all lighting off.
6 remove or attach the adapter lens according to the object projected.
7 focus on the object.
(1)?in most situations, it is better to use the automatic focus feature. use af button for automatic focusing.
(2)?in some conditions, however, automatic focusing may be inadequate. then you must focus manually. press focus f (far) button or focus n (near) button on the remote control to focus on object being far away or on object being close to the camera lens.
auto focusing is not work properly when you try to focus on objects in conditions below.
in this case, adjust the focusing manually.
1 object being too far away or too close to focus on. the automatic focusable distance with the adapter lens attached is within 24 and 32 cm. without the adapter lens, the range is 80 cm to ∞∞.
2 object in a dark area.
3 the background is too bright.
4 image containing several objects at the same time; some objects being close to the lens of this unit and others being far away.
5 very shiny or glassy surface
6 repetitive horizontal or vertical lines
7 object reflecting a strong beam.
8 you see the image on the tv or monitor.
to use versatile image control features, see pages 20 through 22.
for svp-5500dx, to change the object projected during presentation, freeze the image on the screen using freeze button of the presenter then change it. to cancel the freezing, press ext button on the remote control.
