[ram] [dvd-a] [dvd-v] [vcd]

    you can change the audio being received or played.

    press [audio].

    how the type changes depends on when you press the button.

    一、while receiving mts audio (multi-channel television sound stereo)

   

    1 if the broadcast is “mono i sap”, audio will be monaural even if you select stereo mode.

    2 select “mono” if reception is poor during a stereo broadcast.

   

    1 if you change the sound setting while recording, the recorded sound will also change. [ram]

    2 it will not be possible to alter the sound by pressing [audio] in the following cases:

    (1)when a dvd-r is in the disc tray.

    (2)when recording mode is xp and “lpcm” has been selected in the audio menu, “audio mode for xp recording” (→page 45).

    select “main” or “sap” from “select mts” in the audio menu when recording sap broadcasts based on the above conditions (→page 45, audio—select mts).

    3 if recorded in sap mode, main audio is also recorded.

    二、while playing dvd-ram or video cd

   

    for your reference

    you can change the audio for the full images being played with simultaneous rec and play and time slip. [ram]

    三、while playing dvd-audio or dvd-video

    you can change the audio channel number each time you press the button. this allows you to change things like the soundtrack language.

   

    [ram]

    you may be unable to change the audio when you have connected the unit to an av receiver through the digital audio out terminal and “dolby digital” is set to “bitstream”. if this occurs:

    (1) change “dolby digital” to “pcm” (→page 45), or

    (2) connect also with an audio cable (→page 51, [b]) and change the input on the receiver.