1 press [prog/check].
2 press [enter].
4 press [enter] when you have finished programming the timer.
5 press [prog/check] or [return].
the timer recording list disappears and the message “turn recorder off for timer recording” is shown on the television.
to release the unit from recording standby
if you want to record something else before the program start time, for example:
1 the actual time recorded may be longer than the program itself when television programs are recorded using vcr plusi.
2 if you don’t select a recording mode when using vcr plus+ codes to make a timer recording, the unit sets the mode selected on the unit at that time (unless the mode is “xp”, in which case the unit sets “fr” as the mode).
3 “all timer programs are occupied.” appears if there are already 16 programs.
4 the remaining time displayed is based on the current recording mode.
5 when you program successive timer recordings to start immediately one after the other, the unit cannot record the part at the beginning of the later programs (a few seconds when recording with dvd-ram and approximately 30 seconds when recording with dvd-r).
6 if you set dst (daylight saving time) to on when manually setting the clock (→page 47), timer recording may not work when summer switches to winter and vice versa.
[ram] [dvd-r]