[ram]

    specify start and end points to create scenes, then specify the order in which they are to be played. these scenes are not recorded separately so this doesn’t use much capacity.

    you can create a maximum of 99 play lists and 999 scenes.

    preparation

    release protection (cartridge →page 10, disc →page 38) before proceeding.

    1 while stopped

    press [play list].

   

    3 press [enter] at the start point.

   

    4 press [enter] at the end point.

   

    to specify another scene

    select “next” and press [enter], then repeat steps 3 and 4.

   

    to clear the play list screen

    press [play list].

    to stop partway through

    press [return].

    for your reference

    1 you cannot specify an end point before a start point.

    2 you may not be able to specify points within 3 seconds of each other.

    3 play pauses if the end of the last program on the disc is reached during this procedure.

    4 depending on the state of recording, the actual number of play lists that can be recorded may be less than that specified in this manual.