if you connect the unit through a cable tv box or dss receiver (→page 50), tune to your local pbs station before starting auto clock setting. use manual clock setting if auto clock setting does not work or if there is no local pbs channel in your area.
1 press [setup] to show the menus.
if you have not yet set channels, the “auto channel/clock setting” screen appears.
4 press [enter].
auto setting starts. this can take some time, up to a few hours in some cases. (to stop auto clock setting, press [return].) the following screen appears when setting is complete. press [enter].
1 if the time was not set correctly, use manual clock setting or time zone adjust.
2 dst, daylight saving time, shows the summertime setting.
3 time zone shows the time difference from greenwich meantime (gmt).
est=gmt s5, cst=gmt s6, mst=gmts7, pst=gmts8,
ast=gmt s9, hst=gmts10, for other areas: xx hr
manual clock setting
5 press [enter].
the clock starts.
when you change the time zone, the recording times for programs recorded before the time zone was changed also change to correspond to the new time zone.
time zone adjust
adjust the time zone (s1 or r1) if it was not set correctly with auto clock setting.
you cannot change this setting if you set the clock manually.
