(2) push the caps into the tops of the t-shape legs, (2 caps)
(3) attach the two horizontal bars to the t-shape legs.
use hexagonal socket screws and flat washers to attach. partially fasten using the supplied hexagonal wrench, then tighten securely after the upper and lower horizontal bars have been attached.
(4) insert the hooks of the stand into the mounting holes of the copyboard rear frames, insert securely into the hook groove, and tighten with the lock screws.
there are 3 hole positions. by changing the position, the installation height can be changed among 3 levels in 100 mm units (1770, 1870, and 1970 mm (the maximum height)).
(5) mount the printer tray to the copyboard.
see page 7 for information about the assembly and installation of the printer tray.