(2) temporarily fasten the printer tray to the brackets with six m3 screws.
(3) securely tighten the screws that were fastened temporarily.
this completes the assembly of the printer tray.
mounting the printer shaking prevention parts
with some printers, the printer tray may shake some while the printer is operating. in such cases, install the printer shaking prevention parts.
when mounted on a wall, use the shaking prevention parts included with the copyboard (2 cushions).
when mounted on a stand, use the shaking prevention part included with the stand (1 stay).
1 when mounted on a wall
(1) peel off the protective sheets from the cushions' adhesive surfaces.
(2) stick the cushions (2) on the back of the bracket.
for instructions on wall mounting, see the "installation and assembly instructions".
2 when mounted on a stand
(1) release the stand lock knob.
(2) tilt the bottom of the main unit slightly forwards and insert the stay between the printer tray and pipe.
(3) pushing the main unit back towards the stand, insert the groove in the stay into the printer tyay.
(4) refasten the main unit and stand with the lock knob.
for instructions on standassembly, see the "installation and assembly instructions",
