(1) the usb cable (supplied with the copyboard) is used to connect the printer connector of the copyboard with the usb connector of the printer,
(2) connect the ac output connector of the copyboard with the printer power connector.
a use the power cable supplied with the printer to connect the ac power connector of the printer with the (220 to 240 v ac) wall power outlet.
b use the power cable supplied with the copyboard to connect the ac input connector of the copyboard with the (220 to 240 v ac) wall power outlet,
c the printer may be an option.
(3) fasten the power cable and the usb cable with the supplied cable clips.
1. remove the backing paper from the rear surface of the clip and affix the clip at the desired iocation.
2. raise the band of the clip, disengage it from the hook, and pull it out.
3.after finishing the cable wiring, pass the band end of the clip through the guide slot and fasten it by engaging it on the hook.
wiring example
this completes the installation. please check once again that the screws and conncetors are securely fastened.