the first time the scanner is connected and turned on following installation of nikon scan, windows will “register” the scanner with the device manager. if the computer fails to detect the scanner or the scanner does not function as expected when nikon scan is running, the computer may not have correctly registered the scanner. check that the device drivers are correctly installed.

    1 make sure the scanner is connected and turned on

    2 display the “system properties” dialog

    windows xp

    select control panel from the start menu, open performance and maintenance, and click system.

    windows 2000 professional

    select settings ] control panel from the start menu and double-click the system icon.

    windows me, windows 98 se

    select control panel from the start menu and double-click the system icon.

    3 open the device manager

    windows xp, windows 2000 professional

    open the “hardware” panel and click the device manager button.

   

    windows me, windows 98 se

    click the “device manager” tab.

   

    4 check that the scanner is listed as an imaging device click the “+” next to “imaging devices” (windows xp, windows 2000 professional) or “imaging device” (windows me, windows 98 se) and confi rm that the scanner is listed.