before continuing, read the following safety information. do not plug any cables into the system unit, adapters, or electrical outlets until you have reviewed this information. make sure none of the power cords are connected before continuing to the next step.

    in the system you are about to set up:

    1 the ac power-interface connector is considered the main power disconnect device.

    2 this system has redundant power supply capabilities. meaning your system has the capability of running two power supplies simultaneously. when instructed to disconnect the power source, ensure that all power cables have been unplugged.

    an electrical outlet that is not correctly wired could place hazardous voltage on metal parts of the system or the devices that attach to the system. it is the responsibility of the customer to ensure that the outlet is correctly wired and grounded to prevent an electrical shock.

    before installing or removing signal cables, ensure that the power cables for the system unit and all attached devices are unplugged.

    when adding or removing any additional devices to or from the system, ensure that the power cables for those devices are unplugged before the signal cables are connected. if possible, disconnect all power cables from the existing system before you add a device.

    use one hand, when possible, to connect or disconnect signal cables to prevent a possible shock from touching two surfaces with different electrical potentials.

    during an electrical storm, do not connect cables for display stations, printers, telephones, or station protectors for communications lines.

    d05

    this product is equipped with a three-wire power cable and plug for the user’s safety. use this power cable with a properly grounded electrical outlet to avoid electrical shock.

    c01

    to prevent electrical shock hazard, disconnect all power cables from the electrical outlet before relocating the system.

    d01