1. on a model 6c3, open the front rack door.
on a model 6e3, open the bezel door.
2. ensure that the power is connected the system unit.
before you press the power-on button on your operator panel, observe the following:
(1) the power-on led is slowly blinking.
(2) an ok prompt is visible in the operator panel display.
3. press the power-on button on the operator panel.
after pressing the power-on button located on the operator panel, observe the following:
a. the power-on led begins to blink visibly faster.
b. the system cooling fans are activated and begin to accelerate up to operating speed.
there is approximately a 30-second transition period between the time the power-on button is pressed and the power-on led remains on solid (no longer blinking).
c. the power led stays on solid and progress indicators, also referred to as checkpoints, are visible on the operator panel display.
