to return the model 6c3 to the operating position, do the following:

    1. raise both spring-loaded release tabs, located on each rail. see the illustration on page 54 for the location of the release tabs.

    2. ensure the system drawer release latches, located on the system drawer, are in the open position. see the illustration on page 54 for the location of the system drawer release latches.

    3. push the system drawer straight back into the rack until both system drawer release latches have locked into position.

    4. if you removed two thumbscrews from the bezel front, replace them at this time.

    5. close the front rack door.