1. if your firewall has not yet been configured, the setup wizard should launch automatically.
when the wizard launches, select yes in the menu below to allow the firewall to automatically determine your connection.
if you do not see the setup wizard, click the setup wizard link in the upper left to bring up this menu.
2. click next
the setup wizard will now check for the following connection types:
(1)dynamic ip assignment
(2)a login protocol such as pppoe
(3)fixed ip address assignment
next, the setup wizard will report which connection type it has discovered, and then display the appropriate configuration menu. if the setup wizard finds no connection, you will be prompted to check the physical connection between your firewall and the cable or dsl modem. when the connection is properly made, the firewall抯 internet led should be on.
the procedures for filling in the configuration menu for each type of connection follow below.