if you enabled content filtering in the block sites menu, or if you defined an outbound rule to use a schedule, you can set up a schedule for when blocking occurs or when access is restricted. the router allows you to specify when blocking will be enforced by configuring the schedule tab shown below:

   

    to block keywords or internet domains based on a schedule, select every day or select one or more days. if you want to limit access completely for the selected days, select all day. otherwise, if you want to limit access during certain times for the selected days, type a start time and an end time.

    enter the values in24-hour time format. for example, 10:30 am would be 10 hours and 30 minutes and 10:30 pm would be 22 hours and 30 minutes.

    be sure to click apply when you have finished configuring this menu.

    time zone

    the fwg114p wireless firewall/print server uses the network time protocol (ntp) to obtain the current time and date from one of several network time servers on the internet. in order to localize the time for your log entries, you must specify your time zone:

    1 time zone. select your local time zone. this setting will be used for the blocking schedule and for time-stamping log entries.

    2 daylight savings time. select this check box for daylight savings time.

    if your region uses daylight savings time, you must manually select adjust for daylight savings time on the first day of daylight savings time, and unselect it at the end. enabling daylight savings time will add one hour to the standard time.

    be sure to click apply when you have finished configuring this menu.