use these checkboxes to determine which events are included in the log. checking all options will increase the size of the log, so it is good practice to disable any events which are not really required.

    1 known dos attacks and port scans - if checked, denial of service attacks, as well as port scans, will be logged.

    2 attempted access to blocked sites - if checked, the router will log attempts to access sites which are blocked by the "block sites" filter.

    3 all web sites and news groups visited - if checked, all visited web sites and newsgroups are logged.

    4 all incoming tcp/udp/icmp traffic - if checked, all incoming tcp/udp/icmp connections and traffic is logged.

    5 all outgoing tcp/udp/icmp traffic - if checked, all outgoing tcp/udp/icmp connections and traffic is logged.

    6 other ip traffic - if checked, all other traffic (ip packets which are not tcp, udp, or icmp) is logged.

    7 router operation (start up, get time, etc.) - if checked, router operations, such as starting up and getting the time from the internet time server, are logged.

    8 connection to the web-based interface of this router - if checked, administrator connections to the web-based interface will be logged.

    9 other connections and traffic to this router - if checked, this will log traffic sent to this router (rather than through this router to the internet).

    10 allow duplicate log entries - if checked, then events or packets which fall within more than one (1) category above will have a log entry for each category in which they belong. this will generate a large number of log entries. if unchecked, then events or packets will only be logged once. usually, this should be left unchecked.