2 to delete a port created by this setup program, use the windows delete port facility:
a. right-click any printer in the printers folder, and select properties.
b. highlight the port you want to delete.
c. use the delete port button to delete the port. this button is on either the details or ports tab, depending on your version of windows.
3 if you change the printer attached to the fwg114p, run the add port program again and select the new printer.
the options for the print port driver are accessed via the windows port settings button.
use start -] settings -] printers to open the printers folder, then right-click the printer and select properties. the port settings button is on either the details or port tab, depending on your version of windows. an example screen is shown below:
figure 7-1: print port configuration menu
items shown on this screen are as follows:
1 port
if desired, click browse device to select a different device. the select device port button supports multi-port models, but the fwg114p wireless firewall/print server is a single-port print server. the port name is shown in the printer's properties.
2 banner
check this option to print a banner page before each print job. the user name you enter will be printed on the banner page. if using a postscript printer, check the postscript box.
3 retry interval
determines how often windows will poll the print server to establish a connection when the printer is busy.