follow the steps below for the quickest and easiest configuration for the pro 4060 on your office network:

    step 1: enter admin in the name field and password in the password field.

    step 2: configure network interface - click network and then interfaces.

    step 3: configure lan settings - click the icon under configure in the first row of the interface settings table.

    step 4: enter your lan network information - enter a private ip address in the ip address field and the subnet in the subnet mask field. click ok.

    step 5: configure wan settings - click the icon under configure in the second row of the interface settings table.

    step 6: enter your wan network information - enter the ip address information from your isp on this page. if the ip address is obtained using dhcp or pppoe, select this option from the ip assignment menu. enter your dns information to complete the wan configuration. click ok.

    step 7: backup your configuration - click system and then settings. click create backup to create a system backup.

    for details on configuring the pro 4060, refer to the sonicos enhanced administrator’s guide located on your product cd.