basic setup of your load balancer involves the following steps:

    1. attach the load balancer to one (1) pc, and configure it for your lan.

    2. install your load balancer in your lan, and connect the broadband modem or modems.

    3. configure your load balancer for internet access.

    4. configure pcs on your lan to use the load balancer.

    requirements

    (1)one (1) or two (2) dsl or cable modems, each with an internet access account with an isp.

    (2)network cables. use standard 10/100baset network (utp) cables with rj45 connectors

    (3)tcp/ip network protocol must be installed on all pcs.