this is an optional function. proceed with the installation only when your pc supports this remote wake-up and you wish to make use of this function. please check your motherboard user’s guide for more information.

    step 1: make sure the power to the pc is off.

    follow step 1～3 in previous section.

    step 2: check if the fiber adapter is properly installed in a pci slot.

    step 3: prepare a remote wake-up cable. connect the cable from fiber

    adapter to motherboard connector. refer to figure 3 below for details.

    step 4: replace the pc cover then.

    step 5: proceed to “connecting to your network” section.

   

    figure 3: connecting wake-up cable