step 2: if you want to change the current configuration, choose “set up new configuration” from the main menu and press [enter] to proceed.
step 3: choose “media type” and press [enter]. for the fiber adapter, you can only select [auto detect], [100 full] or [100 half] from the “media type” selection. the adapter will not function when selecting [10 full] or[10 half].
step 4: choose “boot rom size” and press [enter]. select [boot enabled] or [boot rom disabled]. note: we do not provide boot rom.
step 5: same steps for “flow control”, “wake on lan”, “link change” and “lan wake signal”: choose, select, [enter], and [esc] to exit.